How to prevent Inside Hexagonal Bolt from galling?

Oct 21, 2025

Leave a message

As a supplier of Inside Hexagonal Bolts, I've witnessed firsthand the challenges that come with preventing galling in these essential fasteners. Galling, also known as cold welding, is a form of wear that occurs when two metal surfaces in contact with each other experience friction, causing material transfer and adhesion between the surfaces. This can lead to seizing, thread damage, and ultimately, the failure of the bolted joint. In this blog post, I'll share some practical tips and strategies on how to prevent Inside Hexagonal Bolts from galling, ensuring the reliability and longevity of your fastening applications.

79

Understanding the Causes of Galling

Before we dive into prevention methods, it's important to understand the factors that contribute to galling in Inside Hexagonal Bolts. Galling is primarily caused by the following factors:

  • Material Compatibility: Certain metal combinations are more prone to galling than others. For example, stainless steel bolts are particularly susceptible to galling when tightened against stainless steel nuts or other stainless steel components. This is because stainless steel has a tendency to form a hard oxide layer on its surface, which can cause the metal to stick together under high pressure and friction.
  • Surface Finish: The surface finish of the bolt and nut can also affect the likelihood of galling. Rough or uneven surfaces can increase friction and cause the metal to seize, while smooth surfaces are less likely to gall. Additionally, the presence of burrs, scratches, or other surface imperfections can create stress concentrations that can lead to galling.
  • Lubrication: Proper lubrication is essential for preventing galling in Inside Hexagonal Bolts. Lubricants reduce friction between the bolt and nut, allowing them to slide smoothly against each other during installation and tightening. Without adequate lubrication, the metal surfaces can come into direct contact, causing galling and seizing.
  • Tightening Torque: Over-tightening the bolt can also increase the risk of galling. When a bolt is tightened beyond its recommended torque, it can cause the threads to deform and the metal to seize. This is especially true for stainless steel bolts, which have a lower yield strength than other metals and are more prone to deformation under high stress.

Prevention Methods

Now that we understand the causes of galling, let's explore some practical methods for preventing it in Inside Hexagonal Bolts.

1. Choose the Right Material

One of the most effective ways to prevent galling is to choose the right material for your application. As mentioned earlier, certain metal combinations are more prone to galling than others. When selecting Inside Hexagonal Bolts, consider the following factors:

  • Material Compatibility: Choose a bolt and nut material that is compatible with each other. For example, if you're using stainless steel bolts, consider using a different type of nut, such as a brass or nylon nut, to reduce the risk of galling.
  • Surface Hardness: Select a bolt and nut with a high surface hardness to reduce the likelihood of galling. Harder metals are less likely to deform and seize under high pressure and friction.
  • Corrosion Resistance: If your application requires corrosion resistance, choose a bolt and nut material that is resistant to corrosion. Stainless steel is a popular choice for its corrosion resistance, but it is also prone to galling. Consider using a coated or plated bolt to improve its corrosion resistance and reduce the risk of galling.

2. Improve Surface Finish

The surface finish of the bolt and nut can have a significant impact on the likelihood of galling. To reduce the risk of galling, consider the following surface finish improvements:

  • Polishing: Polishing the bolt and nut can improve their surface finish and reduce friction. This can help prevent the metal from sticking together and reduce the risk of galling.
  • Coating: Applying a coating or plating to the bolt and nut can also improve their surface finish and reduce friction. Coatings such as zinc, nickel, or chrome can provide a smooth, lubricious surface that reduces the risk of galling.
  • Deburring: Removing burrs, scratches, and other surface imperfections can also reduce the risk of galling. Burrs and scratches can create stress concentrations that can lead to galling, so it's important to ensure that the bolt and nut surfaces are smooth and free of defects.

3. Use Lubrication

Proper lubrication is essential for preventing galling in Inside Hexagonal Bolts. Lubricants reduce friction between the bolt and nut, allowing them to slide smoothly against each other during installation and tightening. To ensure proper lubrication, consider the following tips:

  • Choose the Right Lubricant: Select a lubricant that is compatible with the bolt and nut material and the application environment. For example, if your application requires high-temperature resistance, choose a lubricant that is designed for high-temperature applications.
  • Apply the Lubricant Correctly: Apply the lubricant to the threads of the bolt and nut before installation. Make sure to apply enough lubricant to cover the entire surface of the threads, but not so much that it drips off.
  • Reapply the Lubricant: If the bolt and nut are reused or if the lubricant wears off over time, reapply the lubricant before reinstalling the bolt.

4. Control Tightening Torque

Over-tightening the bolt can increase the risk of galling, so it's important to control the tightening torque during installation. To ensure proper tightening torque, consider the following tips:

  • Use a Torque Wrench: Use a torque wrench to apply the correct amount of torque to the bolt. A torque wrench allows you to apply a specific amount of torque, ensuring that the bolt is tightened to the recommended specifications.
  • Follow the Manufacturer's Recommendations: Refer to the manufacturer's recommendations for the recommended tightening torque for the bolt and nut. The recommended torque will depend on the size, material, and application of the bolt.
  • Avoid Over-Tightening: Do not over-tighten the bolt, as this can cause the threads to deform and the metal to seize. If you're unsure about the correct tightening torque, consult a professional or the manufacturer for guidance.

Conclusion

Preventing galling in Inside Hexagonal Bolts is essential for ensuring the reliability and longevity of your fastening applications. By understanding the causes of galling and implementing the prevention methods outlined in this blog post, you can reduce the risk of galling and ensure that your bolts perform their intended function.

As a supplier of Inside Hexagonal Bolts, I'm committed to providing high-quality products and expert advice to help you prevent galling and ensure the success of your projects. If you have any questions or need assistance with selecting the right bolts for your application, please don't hesitate to contact us. We're here to help you find the best solutions for your fastening needs.

References

  • ASME B18.3.2M - 2019, Socket Head Cap Screws, Metric Series
  • ASTM F593 - 19, Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
  • Machinery's Handbook, 31st Edition, Industrial Press Inc.

Send Inquiry